Blog

Bizimle İletişim

Mr. Jackson Wong

kamach@kamach.com

+86-139-07098609

+8613907098609

Şimdi iletişime geçin

TEXLIFT Electric Skid Steer Loader Advances Sustainable Material Handling

2026-10-31

The TEXLIFT fully electric mini skid-steer loader is part of a widening shift in materials handling from diesel power to battery-electric drive. The machine uses a 9 kW electric motor and a 60V lithium battery pack, a combination intended to reduce noise and tailpipe emissions while maintaining work capability in construction, agriculture and landscaping. Its design also includes a range of attachments and operator-focused features for tasks that require compact equipment.

Electric powertrain targets quieter, cleaner work sites

The loader replaces a conventional diesel engine with a 9 kW electric motor. The change reduces noise output and eliminates tailpipe emissions, allowing the machine to be used in indoor or enclosed environments where environmental and ventilation constraints are stricter.

The power source is a 60V lithium battery designed for high discharge rates and a long cycle life. Under the stated operating conditions, a single charge provides up to six hours of continuous work, a figure that balances runtime with the demands of compact loading tasks.

Technical specifications

The loader’s key ratings are summarized below.

Specification	Details
Rated load capacity	880 lbs
Maximum lift height	85 inches
Dump height at 36-inch reach	55 inches
System pressure	2,320 psi
Dimensions	128 in L x 82 in H x 41 in bucket width

Attachments and operator ergonomics

The loader supports a range of attachments, including a mini excavator attachment, 920 mm pallet forks, a four-in-one bucket, a round bale clamp and a 250 x 1,200 mm auger. The modular setup is intended to support material handling in agriculture, site cleanup in construction and landscaping work.

The operator station emphasizes ergonomic design. Controls are arranged on a clear, intuitive panel intended to reduce operating difficulty and the risk of errors. A USB charging port, cup holder and phone mount are included to improve comfort during longer shifts.

Maintenance and load-management considerations

Because the loader uses an all-electric powertrain, routine service does not require engine oil changes, fuel-filter cleaning or exhaust-system maintenance. Maintenance attention shifts to hydraulic-system inspection, brake wear monitoring for the drum and parking brakes, and proper charging management for the battery pack.

For load handling, the rated capacity is 880 lbs. Operators must account for center-of-gravity effects, particularly when lifting at maximum height or using long attachments, and should follow the load chart to avoid overloading, tip-over or hydraulic-system strain.

Frequently Asked Questions

How is the six-hour runtime for the TEXLIFT mini loader defined?

The six-hour figure is based on average energy consumption under specified operating conditions. Actual runtime varies with load weight, ground slope, attachment use and operator behavior; reserving battery capacity for heavy-duty work is advisable.

How does maintenance differ from a conventional diesel machine?

With an all-electric powertrain, routine maintenance does not include oil changes, fuel-filter service or exhaust-system work. Checks should focus on the hydraulic system, drum and parking brake wear, and correct charging management for the battery pack.

How should the 880 lbs load capacity be assessed in practice?

The 880 lbs figure is the loader’s rated capacity. When moving material, operators must consider how the center of gravity affects stability, especially at maximum lift height or with long attachments, and should follow the load chart to avoid overloading, tip-over or hydraulic-system strain.

blog details

Bizim Hakkımızda